Tuesday, March 31, 2009

Disassembling Microsoft Bluetooth Notebook Mouse 5000

2009-11-8: See this instructable photos instead of my post.
2009-11-8: この記事を見るより、写真による説明を見た方がいいです。百聞は一見にしかず...。


(English version of instruction at the bottom of the post...)

Microsoft Wireless Notebook Optical Mouse 4000 を気に入っていたのですが、
* Macbook で使うには USBレシーバーが邪魔
* 光学式なので僕の机だとマウスパッドがないと動かない
* ホイールを左右に傾けられるやつなのでホイールが溝にひっかかる感じになることがある
というところが気に入らなかった。

Microsoft Bluetooth Notebook Mouse 5000ですべて解消すると思って買ってみました。
しかし、
1. 4000 と比べると形状が違うのでホールド感に違和感がある
2. 4000 のホイールはヌルヌルだったけど 5000 はゴリゴリでうるさいし、ちゃんとホールドしないと回しにくい

1 の問題は、まあ慣れればいいかなと思いましたが、2のゴリゴリ言うホイールは我慢できなかったので、分解して調整してみました。
分解の仕方がわからなかったけど、試行錯誤の結果分解できたのでそれを共有しようというのが本題です。

ポイントは
1. 最初にまわすべきネジの位置 -> 上部後方の三角のレーザーマーク?の下
2. そのネジがトルクスネジ(T6)なのでふつうの+/-のドライバーでは外せない
3. 2/3番目のねじはマウスボタンの下だけど、マウスボタンが固定されている後方のツメをうまくはずさないと回せない
という感じですね。



分解できたら、ホイールの軸受けみたいなところのデコボコと金属のヤマがゴリゴリいうのでそのヤマをマイナスドライバーとかで少し潰す。(画像ピンボケですいません)


はい終わり。

以下は英語で助けを求められたので説明を英語で書いてみました。(2009-5-13)

Instruction
1. Remove the emblem (image of laser?) on the hip? of the mouse. Because of it is glued you can remove it with tip of pin or needle.
2. After removing the emblem, you can see a torx screw (See the first photo). Remove it (I suppose required size of driver is T6).
3. I can't recall precisely, but without the screw you can slid mouse buttons, then unscrew pair of screws under the mouse buttons. Be careful to slid the mouse buttons, they are fixed with claws on the body.
4. Sorry, I can't recall anymore, I hope you get the point from my instruction.